iBot Vac 2

Robot Vacuum Cleaner

iNavi Gyro™ Navigation SLAM

Mega Suction Power of 3000 Pa

Increased Battery Capacity 5200 mAh

Smart Water Tank™ 400+300 ml

Big Dustbin - 700 ml

App control

The ground sensor will detect the stairs to avoid falling

Intelligent recognition of soft obstacles such as curtains

The gyroscope and the SLAM algorithm recognize minimal obstacles.

The wall sensor keeps the robot in straight line cleaning during boarder cleaning.

  • Navigation - iNavi Gyro™ SLAM

    Vac 2 automatically collects environmental data and creates a detailed plan of the entire house. The SLAM algorithm divides the map into smaller sections and forms an efficient cleaning route.

  • Real-time map building

    Watch the cleaning process on the map through the mobile application. You will always know where it is already clean and when the robot will finish cleaning.

  • Mobile App Features:

    Planning and choosing a cleaning mode

    Map display and cleaning status

    Vacuum cleaner tracking

    Setting the suction power

    Wet intensity control

    Lifetime software update

    And much more...

  • Single room cleaning

    Using the map of your house, in the application you can choose to clean a specific room, or the whole house.

  • Cleaning Modes:

    Zigzag cleaning;

    Border cleaning;

    Spot cleaning;

    Scheduled cleaning;

    Cleaning a single room, or the whole house.

  • Separate containers for wet and dry cleaning

    Dustbin - 700 ml;

    Smart Water Tank ™ - 400 + 300 ml.

  • Smart Water Tank™ 700 ml

    The removable container for wet cleaning consists of two parts:

    Container for water (400 ml);

    Dust box (300 ml).

    Water is supplied by an electric pump, which eliminates leakage during charging and makes it possible to adjust the wetting intensity.

  • Electrically Controlled Seepage

    Depending on the type of coating and the degree of contamination, you can choose one of three modes of water supply:

    Minimum;

    Optimal;

    Maximum.

  • Big Dustbin - 700 ml

    A capacious dust collector needs to be cleaned only two to three times a month, with daily use. HEPA and primary filters protect against re-contamination.

  • Three Levels of Suction Power Adjustment

    You can choose the suction power depending on the type of pollution:

    Maximum

    Normal

    Low

  • Mega Suction Power of 3000 Pa

    The Japanese brushless motor NIDEC develops a suction power of up to 3000 Pa. 

  • Unique Duct Design

    The patented design of the air duct has a low air resistance, which leads to lower noise levels and increased productivity.

  • One Cover All ™ V-shaped Floating Brush

    This brush perfectly collects dust, animal hair, hair and other debris from any type of floor covering, including fleecy carpets. The use of bearings of the closed type eliminates tangling of the hair.

  • Tangle Free ™ Side Brushes

    Vac 2 is equipped with two side brushes. The design of Tangle Free ™ implies the presence of an additional brush on each brush to protect it from winding hair.

  • Automatic detection of the floor covering

    Vac 2 automatically detects the type of coverage and adjusts the suction power. In the wet cleaning mode, the robot does not call on the carpet

  • 5200 mAh high-capacity LG battery

    The Li-ion battery of the LG brand with a capacity of 5200 mAh is designed for 150 minutes of operation on a single charge. During this time, the robot can clean up to 250 m2

  • Off-road wheels`

    Off-road wheels easily cross thresholds of up to 2 centimeters and perfectly cope with both slippery tiles and fleecy carpets.

  • Amicro AM380S

    The AM380S is a high-performance system specifically designed for the iNavi Gyro™. By simulating human thinking, the AM380S efficiently processes information about the location of the robot cleaner and the surrounding area. Based on these data, an effective cleaning route is formed.

  • Works with Alexa, Google Home, Xiao AI etc

Not sure wich robot vacuum is right for you?